Archive for November, 2026

Spitfire Audio Releases Eric Whitacre Eternity, Combining Analog Synths, Piano and Processed Choir


Eric Whitacre Eternity combines recordings of analog synthesizers, a historic family piano and heavily processed choir with more than 200 presets, dual-layer sound design and effects drawn from Whitacre’s own studio setup.

Spitfire Audio has released Eric Whitacre Eternity, a virtual instrument library combining analog synthesizers, processed choir recordings and piano samples drawn from the Grammy-winning composer’s latest musical project.

Developed alongside Whitacre’s album Eternity in an Hour, the library captures the electronic and acoustic sound sources used during its production, offering more than 200 presets for ambient composition, sound design and experimental electronic music.

The library’s synthesizer collection centers on the SOMA Lyra-8, alongside a Ciat-Lonbarde Sidrax Organ, Minimoog Model D, Oberheim OB-X8, ASM Hydrasynth, Eurorack modular equipment and Norns/Grid/Just Friends. The instruments were recorded during sessions in Studio Helsinki, providing source material for pads, drones and evolving electronic textures.

Another distinctive source is a Ludwig & Co upright piano that has been in Whitacre’s family since 1903. The instrument is sampled in four dynamic layers with three round robins, with close and mid microphone mixes and five additional signal chains processed through Whitacre’s studio equipment.

The vocal material draws from recordings made at AIR Studios’ Lyndhurst Hall, including material from Spitfire’s previous Eric Whitacre Choir and Contrast libraries, alongside new aleatoric choir recordings. These performances have been granularized, stretched and processed until the original syllables become atmospheric textures.

Features:

  • More than 200 presets combining synthesizers, piano, processed choir and electronic textures.
  • Recordings of the SOMA Lyra-8, Ciat-Lonbarde Sidrax Organ, Minimoog Model D, Oberheim OB-X8 and ASM Hydrasynth.
  • Additional source material from Eurorack, Norns, Grid and Just Friends instruments.
  • Ludwig & Co upright piano samples recorded in four dynamic layers with three round robins.
  • Close and mid microphone mixes, plus five processed piano signal chains.
  • Granularized, stretched and processed choir recordings from AIR Studios.
  • Five effects signals developed from Whitacre’s own equipment: Adorn, Weave, Dwell, Dance and Ruin.
  • Dual-layer presets combining two sounds within a single patch.
  • Assignable XY pad for blending between sound layers and controlling parameters.
  • Additional presets created by six collaborating artists: BlankFor.ms, Lesjamusic, IDRA, Luca Longobardi, Matt Lowery and Elin Piel.
  • Global effects and sound-shaping controls within the INSTRUMENT plugin.

Eric Whitacre on the Piano That Shaped His Sound:

Inside Eric Whitacre’s Modular Synth Rig:

Spitfire Audio Eric Whitacre Eternity is available now for an introductory price of $231, reduced from $289, through December 8, 2026.

Body Synths Laboratory Combines Dual-Channel Effects With Analog Feedback Synthesis


Body Synths Laboratory is a dual-channel analog effects processor and feedback synthesizer featuring four feedback paths, PT2399-based delays, resonant filters and CV-controlled modulation.

Berlin-based Body Synths has introduced Laboratory, a dual-channel effects processor and feedback synthesizer designed to turn audio processing and circuit feedback into an instrument for experimental sound design.

The tabletop device combines voltage-controlled gain, PT2399-based delay and resonant filtering across two channels, with four feedback paths that can drive the system into self-oscillation without an external audio input.

Each channel includes up to 40 dB of gain, a delay circuit based on the PT2399 chip and a resonant filter with low-pass and high-pass modes. The two channels can operate in series or parallel, allowing users to create stereo processing, multi-tap echoes and ping-pong delays. Running the filters in series, with one in low-pass mode and the other in high-pass mode, produces a band-pass response.

Four feedback paths provide additional routing possibilities, controlling delay repeats and the interaction between the two channels. Increasing feedback can push the circuit into self-oscillation, producing sustained drones, distorted textures and noise without requiring an input signal.

A global modulator can operate as either an envelope or an LFO, with attack and decay controls and a cycle time ranging from 10 milliseconds to 10 seconds. Four CV outputs, two positive and two negative, can be routed to the channel controls for effects including tremolo, vibrato, chorus and modulated filtering.

Features:

  • Dual-channel analog effects processor and feedback synthesizer.
  • Four feedback paths for signal routing, delay repeats and self-oscillation.
  • Two independent channels with up to 40 dB of voltage-controlled gain.
  • PT2399-based delay circuits with degraded repeats at longer delay times.
  • Resonant filters with low-pass and high-pass modes.
  • Series and parallel channel routing for stereo processing and band-pass filtering.
  • Output clipping stages for compression and distortion.
  • Global envelope/LFO modulator with 10 ms to 10 s cycle time.
  • Four CV outputs, including two positive and two negative outputs.
  • CV inputs for gain, delay time and filter cutoff on each channel.
  • External trigger input for envelope activation.
  • Two 6.35 mm audio inputs and two 6.35 mm audio outputs.

Body Synths Laboratory is available now for a suggested retail price of €420 excluding VAT.

Origami Duo Combines Dual Complex Oscillators With Mid-Side Processing


Larix Elektro has introduced the Origami Duo, a multifunction Eurorack module that combines two analog oscillators, multi-stage wavefolders, VCAs, an envelope generator and a four-output LFO.

Designed to operate as a complete synthesizer voice, dual complex oscillator or stereo processor, the module also includes a configurable Mid-Side processing matrix.

The Origami Duo is based around two AS3340 oscillator circuits, each followed by a multi-stage wavefolder and additional waveshaping circuitry. The signal paths include comparators that allow the waveforms to transition toward square waves, with pulse-width modulation available for further timbral control.

Each oscillator has its own dedicated processing section, with the two channels also capable of interacting through the module’s internal modulation and Mid-Side routing architecture.

Features:

  • Dual analog oscillator architecture based on AS3340 oscillator circuitry.
  • Two independent oscillator sections.
  • Multi-stage wavefolder for each oscillator.
  • Comparator-based waveshaping with triangle-to-square transitions.
  • Pulse-width modulation for additional waveform control.
  • Two VCAs with unipolar and bipolar operating modes.
  • VCAs capable of operating as ring modulators.
  • Configurable Left/Right-to-Mid/Side and Mid/Side-to-Left/Right processing.
  • Four-output LFO with phase-shifted modulation signals.
  • Integrated Attack-Decay/Attack-Release envelope generator.
  • CV control of the principal functional blocks, including the envelope and LFO.
  • Individual inputs and outputs for reconfiguring internal signal paths.
  • Can operate as a complete synthesizer voice, dual complex oscillator or stereo processor.

Larix Elektro Origami Duo is available now for €680, including VAT.