Dirty LA is a Free Compressor VST Plugin

 

Dirty LA is a free compressor plugin that channels the LA-2A and other vintage limiting amps. Bedroom Producers Blog promises a free and easy route to musical compression with a touch of grit.

 

Bedroom Producers Blog is back on the free plugin trail with the release of BPB Dirty LA, a VST/AU compressor that’s based on vintage limiting amps such as the LA-2A.

 

Dirty LA features – musical-sounding compression, a streamlined workflow and a simple user interface. There’s also a Dirt algorithm to provide saturation with gentle transient reduction.

 

By default, Dirty LA gives you a relatively fast attack time and moderate compression ratio, but if you engage the limiting mode you can get a faster attack time and a higher compression ratio. You can also use the plugin to provide ‘mix glue’ on the master bus.

 

When Dirt mode is engaged, Dirty LA uses 4X internal oversampling, but this is bypassed when Dirt is switched off to reduce CPU usage.

You can get your free download of BPB Dirty LA now on the Bedroom Producers Blog website.

Arturia $99 Tape Mello-Fi plugin is free to download

 

Arturia’s $99 Tape Mello-Fi plugin is free to download again, but only for a limited time.

 

If you missed out on Arturia’s giveaway of its $99 Tape Mello-Fi plugin last time, make sure you do not miss out this time. You’ve now got another chance to download it for free courtesy of Audio Plugin Deals.

 

This Mellotron-inspired lofi effect is a vintage tape-emulation and lofi effect based on the sound and behaviour of the classic Mellotron (and, in turn Arturia Mellotron V emulation). Parameter knobs enable you to adjust the amount of Noise, Flutter, Wow, Wear and ‘Mechanics’, and also enable you dial in subtle distortion and saturation.

 

This leaves you with an effect that promises to apply lo-fi vibes to anything you stick it on – drum loops, vocals or even your entire mix.

 

A 25-preset library, gives you plenty of retro starting points.

 

Other features include an interactive tape wheel with tempo-synced Tape Stop feature and optional Instant Tape Catch-up, a 12dB low-pass and high-pass filter section, and a Stereo Width feature that introduces offsets to Wow and Flutter from left to right for an extra-wide sound.

 

Tape Mello-Fi runs as a VST/AU/AAX plugin on PC and Mac and is available for free for a limited time only. Get it download on the Audio Plugin Deals website.

 

Akai Force Update Adds New Instruments, Effects, Probability, Ableton Link v3 and More

 

Akai Professional has released Force 3.2, a free update that adds a variety of features, including MPC instruments, Air Effects, probability and ratcheting, Ableton Link v3 and more.

 

MPC Plugin instruments/Effects – You can now purchase a range of new AIR instruments/Effects for FORCE. The new collection of plugins brings together the AIR team’s expertise in sampling, synthesis, and DSP. Each instrument comes in both Standalone and MPC Software desktop versions. Akai Force Standalone Sampler/Sequencer

The instruments include:

Fabric XL

Air Stage Piano EP

Mini D

Flavor Pro

Air Organ

Air Piano

Air OPx4

Studio Strings

New Air Effects:

  • AIR FLAVOR – Get that vinyl record feel from any sample or sound source using the new AIR Flavor insert effect. Select from over 30 different timbres including Radio Transistors, Tubes, Boom Boxes and Amplifiers to manipulate your source sound. You can then add and simulate analog record Distortion, Flutter, and Noise while also impacting the stereo field to create more mono sounding audio effects.
  • AIR AMP SIM – FORCE 3.2 brings a new Amp and Cabinet Simulator to the FORCE platform for adding harmonic distortion to samples, vocals, drums, synths, bass, and guitars.
  • AIR GRANULATOR – Granulator has also been updated making it easier to mangle your audio and create new timbres and tones using its granulation engine. The new update for FORCE 3.2 also gives users control over three new parameters: Reverse, Shape and Skew.

 

Probability and Ratcheting:

In FORCE 3.2 you can now add Ratchet effects to your MIDI and add groove to rhythmic elements or melodic lines. The Probability MIDI setting lets you choose the probability that a note from your MIDI track will play based on 0% to 100% probability.

 

Track Re-Order:

In FORCE 3.2 you can now re-order your tracks by simply changing the tracks position directly from the Matrix, Mixer, or Arrange windows. New track position will take effect when you leave the editing popup.

 

Automation Snapshots:

In FORCE 3.2, you can now capture a snapshot of all of the automation parameters in your project within a launch row. Once a snapshot has been captured to a row, automation settings can be launched with event data on that row.

 

Tuner:

FORCE 3.2 adds an integrated high-fidelity instrument Tuner to its arsenal of tools. Now you can tune your external MIDI CV synth, guitar, bass or any other musical instrument using the FORCE Tuner completely standalone.

Find out more on the Akai website to download. Akai Force Standalone Sampler/Sequencer

The instruments include:

FORCE 3.2 also includes other enhancements, improvements, and new functionalities

  • FORCE now contains support for Ableton Link v3
  • DrumSynth Multi now has mute groups
  • FX Racks now include racks that use the Flavor and Amp Sim effects
  • References to Master have now been renamed ‘Global’ or ‘Main’
  • The TUI Project popup gets an Audition F-key
  • Arpeggiator settings are now saved and recalled with the FORCE project
  • XYFX location is now saved and recalled with the FORCE project